matters needing attention:

1: Deadline: The estimated lifespan of a seat belt is 5 years, but the following factors may reduce product performance and shorten its lifespan: incorrect storage, incorrect use, fall protection, deformation, exposure to chemical substances (acid and alkali), exposure to heat sources above 60 degrees Celsius;

2: Hanging point inspection: Provide a minimum resistance of 10KN, whether it is above the operator; Is the vertical position within the working face range (maximum angle+-30 °), fully suitable for the fixed device of the equipment, without any sharp edges, cutting edges

3: Preservation: The seat belt should be cleaned with water and neutral soap. Do not use acids, solvents, or any solvents based on them, let the seat belt air dry in a well ventilated area, and keep away from heat sources. Store the seat belt in a location away from moisture and UV rays

Avoid any corrosive air, as well as overheated or undercooled environments;

4: Before using the safety hook, check for any signs of deformation or wear, and ensure that the locking system is working properly. If the safety hook has already been used to protect against a fall, it must be returned for inspection for safety reasons.